Bu derste Pythonda modüller nasıl kullanılır öğrenmeye çalışacağız. Ayrıca bir modülü içeri aktarmanın değişik yöntemlerini göreceğiz.
İsterseniz hazır bir modül olan math modülünü kullanmaya başlayalım.
Bir modülü içeri aktarmak yani programımıza dahil etmek için import modül_adı yazabiliriz. İsterseniz bunun için math modülünü içeri aktaralım.
import math # Modülü içeri aktarıyoruz. Artık bu modülün tüm fonksiyonlarını kullanabiliriz.
dir(math) # Math modülünün içindekileri görmek için dir fonksiyonunu kullanabiliriz.
['__doc__', '__loader__', '__name__', '__package__', '__spec__', 'acos', 'acosh', 'asin', 'asinh', 'atan', 'atan2', 'atanh', 'ceil', 'copysign', 'cos', 'cosh', 'degrees', 'e', 'erf', 'erfc', 'exp', 'expm1', 'fabs', 'factorial', 'floor', 'fmod', 'frexp', 'fsum', 'gamma', 'gcd', 'hypot', 'inf', 'isclose', 'isfinite', 'isinf', 'isnan', 'ldexp', 'lgamma', 'log', 'log10', 'log1p', 'log2', 'modf', 'nan', 'pi', 'pow', 'radians', 'sin', 'sinh', 'sqrt', 'tan', 'tanh', 'tau', 'trunc']
help(math) # Fonksiyonların görevlerini görebilmek için help fonksiyonunu kullanabiliriz.
Help on built-in module math: NAME math DESCRIPTION This module is always available. It provides access to the mathematical functions defined by the C standard. FUNCTIONS acos(...) acos(x) Return the arc cosine (measured in radians) of x. acosh(...) acosh(x) Return the inverse hyperbolic cosine of x. asin(...) asin(x) Return the arc sine (measured in radians) of x. asinh(...) asinh(x) Return the inverse hyperbolic sine of x. atan(...) atan(x) Return the arc tangent (measured in radians) of x. atan2(...) atan2(y, x) Return the arc tangent (measured in radians) of y/x. Unlike atan(y/x), the signs of both x and y are considered. atanh(...) atanh(x) Return the inverse hyperbolic tangent of x. ceil(...) ceil(x) Return the ceiling of x as an Integral. This is the smallest integer >= x. copysign(...) copysign(x, y) Return a float with the magnitude (absolute value) of x but the sign of y. On platforms that support signed zeros, copysign(1.0, -0.0) returns -1.0. cos(...) cos(x) Return the cosine of x (measured in radians). cosh(...) cosh(x) Return the hyperbolic cosine of x. degrees(...) degrees(x) Convert angle x from radians to degrees. erf(...) erf(x) Error function at x. erfc(...) erfc(x) Complementary error function at x. exp(...) exp(x) Return e raised to the power of x. expm1(...) expm1(x) Return exp(x)-1. This function avoids the loss of precision involved in the direct evaluation of exp(x)-1 for small x. fabs(...) fabs(x) Return the absolute value of the float x. factorial(...) factorial(x) -> Integral Find x!. Raise a ValueError if x is negative or non-integral. floor(...) floor(x) Return the floor of x as an Integral. This is the largest integer <= x. fmod(...) fmod(x, y) Return fmod(x, y), according to platform C. x % y may differ. frexp(...) frexp(x) Return the mantissa and exponent of x, as pair (m, e). m is a float and e is an int, such that x = m * 2.**e. If x is 0, m and e are both 0. Else 0.5 <= abs(m) < 1.0. fsum(...) fsum(iterable) Return an accurate floating point sum of values in the iterable. Assumes IEEE-754 floating point arithmetic. gamma(...) gamma(x) Gamma function at x. gcd(...) gcd(x, y) -> int greatest common divisor of x and y hypot(...) hypot(x, y) Return the Euclidean distance, sqrt(x*x + y*y). isclose(...) isclose(a, b, *, rel_tol=1e-09, abs_tol=0.0) -> bool Determine whether two floating point numbers are close in value. rel_tol maximum difference for being considered "close", relative to the magnitude of the input values abs_tol maximum difference for being considered "close", regardless of the magnitude of the input values Return True if a is close in value to b, and False otherwise. For the values to be considered close, the difference between them must be smaller than at least one of the tolerances. -inf, inf and NaN behave similarly to the IEEE 754 Standard. That is, NaN is not close to anything, even itself. inf and -inf are only close to themselves. isfinite(...) isfinite(x) -> bool Return True if x is neither an infinity nor a NaN, and False otherwise. isinf(...) isinf(x) -> bool Return True if x is a positive or negative infinity, and False otherwise. isnan(...) isnan(x) -> bool Return True if x is a NaN (not a number), and False otherwise. ldexp(...) ldexp(x, i) Return x * (2**i). lgamma(...) lgamma(x) Natural logarithm of absolute value of Gamma function at x. log(...) log(x[, base]) Return the logarithm of x to the given base. If the base not specified, returns the natural logarithm (base e) of x. log10(...) log10(x) Return the base 10 logarithm of x. log1p(...) log1p(x) Return the natural logarithm of 1+x (base e). The result is computed in a way which is accurate for x near zero. log2(...) log2(x) Return the base 2 logarithm of x. modf(...) modf(x) Return the fractional and integer parts of x. Both results carry the sign of x and are floats. pow(...) pow(x, y) Return x**y (x to the power of y). radians(...) radians(x) Convert angle x from degrees to radians. sin(...) sin(x) Return the sine of x (measured in radians). sinh(...) sinh(x) Return the hyperbolic sine of x. sqrt(...) sqrt(x) Return the square root of x. tan(...) tan(x) Return the tangent of x (measured in radians). tanh(...) tanh(x) Return the hyperbolic tangent of x. trunc(...) trunc(x:Real) -> Integral Truncates x to the nearest Integral toward 0. Uses the __trunc__ magic method. DATA e = 2.718281828459045 inf = inf nan = nan pi = 3.141592653589793 tau = 6.283185307179586 FILE (built-in)
Peki bu içeri aktarma yöntemiyle math modülünün herhangi bir fonksiyonunu nasıl kullanacağız ?
----------------------------------------------------------------------------------------------------------------------------
modül_adı.fonksiyonadı()
----------------------------------------------------------------------------------------------------------------------------
Örneğin ilk olarak math modülünün içindeki factorial fonksiyonu ne iş yapıyor bakalım.
help(math.factorial)
Help on built-in function factorial in module math: factorial(...) factorial(x) -> Integral Find x!. Raise a ValueError if x is negative or non-integral.
math.factorial(5)
120
math.factorial(10)
3628800
help(math.floor)
Help on built-in function floor in module math: floor(...) floor(x) Return the floor of x as an Integral. This is the largest integer <= x.
math.floor(5.4)
5
math.floor(3.5)
3
help(math.ceil)
Help on built-in function ceil in module math: ceil(...) ceil(x) Return the ceiling of x as an Integral. This is the smallest integer >= x.
math.ceil(5.4)
6
math.ceil(3.5)
4
Peki biz bir modülü kendi belirlediğimiz isimle nasıl kullanıyoruz ? Bunun için de şu şekilde bir şey yapacağız.
import math as matematik
matematik.factorial(6) # Modülü artık matematik ismiyle kullanabiliriz.
720
matematik.factorial(0)
1
Bir modülü programımıza dahil etmek için bu yöntemi de kullanabiliriz. İsterseniz math modülünü bu yöntem içeri aktaralım.
from math import * # Yıldızın anlamı math modülünün içindeki bütün fonksiyonları almak istediğimizi belirtiyor.
dir(math)
['__doc__', '__loader__', '__name__', '__package__', '__spec__', 'acos', 'acosh', 'asin', 'asinh', 'atan', 'atan2', 'atanh', 'ceil', 'copysign', 'cos', 'cosh', 'degrees', 'e', 'erf', 'erfc', 'exp', 'expm1', 'fabs', 'factorial', 'floor', 'fmod', 'frexp', 'fsum', 'gamma', 'gcd', 'hypot', 'inf', 'isclose', 'isfinite', 'isinf', 'isnan', 'ldexp', 'lgamma', 'log', 'log10', 'log1p', 'log2', 'modf', 'nan', 'pi', 'pow', 'radians', 'sin', 'sinh', 'sqrt', 'tan', 'tanh', 'tau', 'trunc']
Peki böyle bir durumda math modülünün içindeki fonksiyonları nasıl kullanacağız. Bunun için modül ismini yazmamıza gerek kalmamaktadır.
--------------------------------------------------------------------------------------------------------------------------- fonksiyon_adı() ---------------------------------------------------------------------------------------------------------------------------
factorial(5)
120
factorial(6)
720
floor(4.5)
4
Peki bir modül içindeki fonksiyonların belli bir kısmını almak için ne yapacağız ? Bunun için hangi fonksiyonları alacağımızı özellikle belirtmemiz gerekiyor.
Öncelikle kernel kısmından programımı restart yapalım. Böylelikle Jupyter sıfırlanacaktır.
from math import factorial,floor # Sadece 2 tanesini dahil ettik.
factorial(5)
120
floor(3.5)
3
ceil(3.4) # Dahil etmediğimiz için hata verdi.
--------------------------------------------------------------------------- NameError Traceback (most recent call last) <ipython-input-5-3fffe6b889eb> in <module>() ----> 1 ceil(3.4) # Dahil etmediğimiz için hata verdi. NameError: name 'ceil' is not defined
Peki bu yöntemlerin birbirinden farkı ne ? 2.yöntemi kullandığımızda bildiğimiz gibi sadece fonksiyon isimlerini kullanıyoruz. Ancak eğer programa birden fazla modül dahil edersek veya dahil ettiğimiz modülün içindeki fonksiyon kendi tanımladığımız fonksiyon ismiyle aynıysa Python son gördüğü fonksiyonu çalıştıracaktır.
** Tekrar Kernel kısmından Jupyter'i sıfırlayalım. **
from math import *
def factorial(sayı):
print("Kendi Factorial fonksiyonum.")
faktoriyel = 1
if (sayı == 0 or sayı == 1):
return 1
while (sayı >= 1):
faktoriyel *= sayı
sayı -= 1
return faktoriyel
factorial(5)
Kendi Factorial fonksiyonum.
120
İşte modülleri programımıza dahil etmek bu şekilde yapılabiliyor. Bir sonraki konuda kendi modüllerimizi nasıl yazacağımızı ve kullanacağımızı öğreneceğiz.