*Adapted from Chapter 8 of An Introduction to Statistical Learning*

Why are we learning about decision trees?

- Can be applied to both regression and classification problems
- Many useful properties
- Very popular
- Basis for more sophisticated models
- Have a different way of "thinking" than the other models we have studied

Students will be able to:

- Explain how a decision tree is created
- Build a decision tree model in scikit-learn
- Tune a decision tree model and explain how tuning impacts the model
- Interpret a tree diagram
- Describe the key differences between regression and classification trees
- Decide whether a decision tree is an appropriate model for a given problem

Major League Baseball player data from 1986-87:

**Years**(x-axis): number of years playing in the major leagues**Hits**(y-axis): number of hits in the previous year**Salary**(color): low salary is blue/green, high salary is red/yellow

Group exercise:

- The data above is our
**training data**. - We want to build a model that predicts the Salary of
**future players**based on Years and Hits. - We are going to "segment" the feature space into regions, and then use the
**mean Salary in each region**as the predicted Salary for future players. - Intuitively, you want to
**maximize**the similarity (or "homogeneity") within a given region, and**minimize**the similarity between different regions.

Rules for segmenting:

- You can only use
**straight lines**, drawn one at a time. - Your line must either be
**vertical or horizontal**. - Your line
**stops**when it hits an existing line.

Above are the regions created by a computer:

- $R_1$: players with
**less than 5 years**of experience, mean Salary of**\$166,000** - $R_2$: players with
**5 or more years**of experience and**less than 118 hits**, mean Salary of**\$403,000** - $R_3$: players with
**5 or more years**of experience and**118 hits or more**, mean Salary of**\$846,000**

**Note:** Years and Hits are both integers, but the convention is to use the **midpoint** between adjacent values to label a split.

These regions are used to make predictions on **out-of-sample data**. Thus, there are only three possible predictions! (Is this different from how **linear regression** makes predictions?)

Below is the equivalent regression tree:

The first split is **Years < 4.5**, thus that split goes at the top of the tree. When a splitting rule is **True**, you follow the left branch. When a splitting rule is **False**, you follow the right branch.

For players in the **left branch**, the mean Salary is \$166,000, thus you label it with that value. (Salary has been divided by 1000 and log-transformed to 5.11.)

For players in the **right branch**, there is a further split on **Hits < 117.5**, dividing players into two more Salary regions: \$403,000 (transformed to 6.00), and \$846,000 (transformed to 6.74).

**What does this tree tell you about your data?**

- Years is the most important factor determining Salary, with a lower number of Years corresponding to a lower Salary.
- For a player with a lower number of Years, Hits is not an important factor determining Salary.
- For a player with a higher number of Years, Hits is an important factor determining Salary, with a greater number of Hits corresponding to a higher Salary.

**Question:** What do you like and dislike about decision trees so far?

Your **training data** is a tiny dataset of used vehicle sale prices. Your goal is to **predict price** for testing data.

- Read the data into a Pandas DataFrame.
- Explore the data by sorting, plotting, or split-apply-combine (aka
`group_by`

). - Decide which feature is the most important predictor, and use that to create your first splitting rule.
- Only binary splits are allowed.

- After making your first split, split your DataFrame into two parts, and then explore each part to figure out what other splits to make.
- Stop making splits once you are convinced that it strikes a good balance between underfitting and overfitting.
- Your goal is to build a model that generalizes well.
- You are allowed to split on the same variable multiple times!

- Draw your tree, labeling the leaves with the mean price for the observations in that region.
- Make sure nothing is backwards: You follow the
**left branch**if the rule is true, and the**right branch**if the rule is false.

- Make sure nothing is backwards: You follow the

**Ideal approach:** Consider every possible partition of the feature space (computationally infeasible)

**"Good enough" approach:** recursive binary splitting

- Begin at the top of the tree.
- For
**every feature**, examine**every possible cutpoint**, and choose the feature and cutpoint such that the resulting tree has the lowest possible mean squared error (MSE). Make that split. - Examine the two resulting regions, and again make a
**single split**(in one of the regions) to minimize the MSE. - Keep repeating step 3 until a
**stopping criterion**is met:- maximum tree depth (maximum number of splits required to arrive at a leaf)
- minimum number of observations in a leaf

In [1]:

```
# vehicle data
import pandas as pd
train = pd.read_csv("../data/vehicles_train.csv")
```

In [2]:

```
# before splitting anything, just predict the mean of the entire dataset
train['prediction'] = train.price.mean()
train
```

Out[2]:

In [3]:

```
# calculate RMSE for those predictions
from sklearn import metrics
import numpy as np
np.sqrt(metrics.mean_squared_error(train.price, train.prediction))
```

Out[3]:

In [4]:

```
# define a function that calculates the RMSE for a given split of miles
def mileage_split(miles):
lower_mileage_price = train[train.miles < miles].price.mean()
higher_mileage_price = train[train.miles >= miles].price.mean()
train['prediction'] = np.where(train.miles < miles, lower_mileage_price, higher_mileage_price)
return np.sqrt(metrics.mean_squared_error(train.price, train.prediction))
```

In [5]:

```
# calculate RMSE for tree which splits on miles < 50000
print('RMSE:', mileage_split(50000))
train
```

Out[5]:

In [6]:

```
# calculate RMSE for tree which splits on miles < 100000
print('RMSE:', mileage_split(100000))
train
```

Out[6]:

In [7]:

```
# check all possible mileage splits
mileage_range = range(train.miles.min(), train.miles.max(), 1000)
RMSE = [mileage_split(miles) for miles in mileage_range]
```

In [8]:

```
# allow plots to appear in the notebook
%matplotlib inline
import matplotlib.pyplot as plt
plt.rcParams['figure.figsize'] = (6, 4)
plt.rcParams['font.size'] = 14
```

In [9]:

```
# plot mileage cutpoint (x-axis) versus RMSE (y-axis)
plt.plot(mileage_range, RMSE)
plt.xlabel('Mileage cutpoint')
plt.ylabel('RMSE (lower is better)')
```

Out[9]:

**Recap:** Before every split, this process is repeated for every feature, and the feature and cutpoint that produces the lowest MSE is chosen.

In [10]:

```
# encode car as 0 and truck as 1
train['vtype'] = train.vtype.map({'car':0, 'truck':1})
```

In [11]:

```
# define X and y
feature_cols = ['year', 'miles', 'doors', 'vtype']
X = train[feature_cols]
y = train.price
```

In [12]:

```
# instantiate a DecisionTreeRegressor (with random_state=1)
from sklearn.tree import DecisionTreeRegressor
treereg = DecisionTreeRegressor(random_state=1)
treereg
```

Out[12]:

In [13]:

```
# use leave-one-out cross-validation (LOOCV) to estimate the RMSE for this model
from sklearn.cross_validation import cross_val_score
scores = cross_val_score(treereg, X, y, cv=14, scoring='neg_mean_squared_error')
np.mean(np.sqrt(-scores))
```

Out[13]:

- Left: Regression tree for Salary
**grown deeper** - Right: Comparison of the
**training, testing, and cross-validation errors**for trees with different numbers of leaves

The **training error** continues to go down as the tree size increases (due to overfitting), but the lowest **cross-validation error** occurs for a tree with 3 leaves.

Let's try to reduce the RMSE by tuning the **max_depth** parameter:

In [14]:

```
# try different values one-by-one
treereg = DecisionTreeRegressor(max_depth=1, random_state=1)
scores = cross_val_score(treereg, X, y, cv=14, scoring='neg_mean_squared_error')
np.mean(np.sqrt(-scores))
```

Out[14]:

Or, we could write a loop to try a range of values:

In [15]:

```
# list of values to try
max_depth_range = range(1, 8)
# list to store the average RMSE for each value of max_depth
RMSE_scores = []
# use LOOCV with each value of max_depth
for depth in max_depth_range:
treereg = DecisionTreeRegressor(max_depth=depth, random_state=1)
MSE_scores = cross_val_score(treereg, X, y, cv=14, scoring='neg_mean_squared_error')
RMSE_scores.append(np.mean(np.sqrt(-MSE_scores)))
```

In [16]:

```
# plot max_depth (x-axis) versus RMSE (y-axis)
plt.plot(max_depth_range, RMSE_scores)
plt.xlabel('max_depth')
plt.ylabel('RMSE (lower is better)')
```

Out[16]:

In [17]:

```
# max_depth=3 was best, so fit a tree using that parameter
treereg = DecisionTreeRegressor(max_depth=3, random_state=1)
treereg.fit(X, y)
```

Out[17]:

In [18]:

```
# "Gini importance" of each feature: the (normalized) total reduction of error brought by that feature
pd.DataFrame({'feature':feature_cols, 'importance':treereg.feature_importances_})
```

Out[18]:

In [19]:

```
# create a Graphviz file
from sklearn.tree import export_graphviz
export_graphviz(treereg, out_file='tree_vehicles.dot', feature_names=feature_cols)
# At the command line, run this to convert to PNG:
# dot -Tpng tree_vehicles.dot -o tree_vehicles.png
```

Reading the internal nodes:

**samples:**number of observations in that node before splitting**mse:**MSE calculated by comparing the actual response values in that node against the mean response value in that node**rule:**rule used to split that node (go left if true, go right if false)

Reading the leaves:

**samples:**number of observations in that node**value:**mean response value in that node**mse:**MSE calculated by comparing the actual response values in that node against "value"

In [20]:

```
# read the testing data
url = 'https://raw.githubusercontent.com/justmarkham/DAT8/master/data/vehicles_test.csv'
test = pd.read_csv(url)
test['vtype'] = test.vtype.map({'car':0, 'truck':1})
test
```

Out[20]:

**Question:** Using the tree diagram above, what predictions will the model make for each observation?

In [21]:

```
# use fitted model to make predictions on testing data
X_test = test[feature_cols]
y_test = test.price
y_pred = treereg.predict(X_test)
y_pred
```

Out[21]:

In [22]:

```
# calculate RMSE
np.sqrt(metrics.mean_squared_error(y_test, y_pred))
```

Out[22]:

In [23]:

```
# calculate RMSE for your own tree!
y_test = [3000, 6000, 12000]
y_pred = [0, 0, 0]
from sklearn import metrics
np.sqrt(metrics.mean_squared_error(y_test, y_pred))
```

Out[23]:

**Example:** Predict whether Barack Obama or Hillary Clinton will win the Democratic primary in a particular county in 2008:

**Questions:**

- What are the observations? How many observations are there?
- What is the response variable?
- What are the features?
- What is the most predictive feature?
- Why does the tree split on high school graduation rate twice in a row?
- What is the class prediction for the following county: 15% African-American, 90% high school graduation rate, located in the South, high poverty, high population density?
- What is the predicted probability for that same county?

regression trees | classification trees |
---|---|

predict a continuous response | predict a categorical response |

predict using mean response of each leaf | predict using most commonly occuring class of each leaf |

splits are chosen to minimize MSE | splits are chosen to minimize Gini index (discussed below) |

Common options for the splitting criteria:

**classification error rate:**fraction of training observations in a region that don't belong to the most common class**Gini index:**measure of total variance across classes in a region

Pretend we are predicting whether someone buys an iPhone or an Android:

- At a particular node, there are
**25 observations**(phone buyers), of whom**10 bought iPhones and 15 bought Androids**. - Since the majority class is
**Android**, that's our prediction for all 25 observations, and thus the classification error rate is**10/25 = 40%**.

Our goal in making splits is to **reduce the classification error rate**. Let's try splitting on gender:

**Males:**2 iPhones and 12 Androids, thus the predicted class is Android**Females:**8 iPhones and 3 Androids, thus the predicted class is iPhone- Classification error rate after this split would be
**5/25 = 20%**

Compare that with a split on age:

**30 or younger:**4 iPhones and 8 Androids, thus the predicted class is Android**31 or older:**6 iPhones and 7 Androids, thus the predicted class is Android- Classification error rate after this split would be
**10/25 = 40%**

The decision tree algorithm will try **every possible split across all features**, and choose the split that **reduces the error rate the most.**

Calculate the Gini index before making a split:

$$1 - \left(\frac {iPhone} {Total}\right)^2 - \left(\frac {Android} {Total}\right)^2 = 1 - \left(\frac {10} {25}\right)^2 - \left(\frac {15} {25}\right)^2 = 0.48$$- The
**maximum value**of the Gini index is 0.5, and occurs when the classes are perfectly balanced in a node. - The
**minimum value**of the Gini index is 0, and occurs when there is only one class represented in a node. - A node with a lower Gini index is said to be more "pure".

Evaluating the split on **gender** using Gini index:

Evaluating the split on **age** using Gini index:

Again, the decision tree algorithm will try **every possible split**, and will choose the split that **reduces the Gini index (and thus increases the "node purity") the most.**

- Gini index is generally preferred because it will make splits that
**increase node purity**, even if that split does not change the classification error rate. - Node purity is important because we're interested in the
**class proportions**in each region, since that's how we calculate the**predicted probability**of each class. - scikit-learn's default splitting criteria for classification trees is Gini index.

Note: There is another common splitting criteria called **cross-entropy**. It's numerically similar to Gini index, but slower to compute, thus it's not as popular as Gini index.

We'll build a classification tree using the Titanic data:

In [24]:

```
# read in the data
titanic = pd.read_csv("../data/titanic.csv")
# encode female as 0 and male as 1
titanic['Sex'] = titanic.Sex.map({'female':0, 'male':1})
# fill in the missing values for age with the median age
titanic.Age.fillna(titanic.Age.median(), inplace=True)
# create a DataFrame of dummy variables for Embarked
embarked_dummies = pd.get_dummies(titanic.Embarked, prefix='Embarked')
embarked_dummies.drop(embarked_dummies.columns[0], axis=1, inplace=True)
# concatenate the original DataFrame and the dummy DataFrame
titanic = pd.concat([titanic, embarked_dummies], axis=1)
# print the updated DataFrame
titanic.head()
```

Out[24]:

**Survived:**0=died, 1=survived (response variable)**Pclass:**1=first class, 2=second class, 3=third class- What will happen if the tree splits on this feature?

**Sex:**0=female, 1=male**Age:**numeric value**Embarked:**C or Q or S

In [25]:

```
# define X and y
feature_cols = ['Pclass', 'Sex', 'Age', 'Embarked_Q', 'Embarked_S']
X = titanic[feature_cols]
y = titanic.Survived
```

In [26]:

```
# fit a classification tree with max_depth=3 on all data
from sklearn.tree import DecisionTreeClassifier
treeclf = DecisionTreeClassifier(max_depth=3, random_state=1)
treeclf.fit(X, y)
```

Out[26]:

In [27]:

```
# create a Graphviz file
export_graphviz(treeclf, out_file='tree_titanic.dot', feature_names=feature_cols)
# At the command line, run this to convert to PNG:
# dot -Tpng tree_titanic.dot -o tree_titanic.png
```

Notice the split in the bottom right: the **same class** is predicted in both of its leaves. That split didn't affect the **classification error rate**, though it did increase the **node purity**, which is important because it increases the accuracy of our predicted probabilities.

In [28]:

```
# compute the feature importances
pd.DataFrame({'feature':feature_cols, 'importance':treeclf.feature_importances_})
```

Out[28]:

**Advantages of decision trees:**

- Can be used for regression or classification
- Can be displayed graphically
- Highly interpretable
- Can be specified as a series of rules, and more closely approximate human decision-making than other models
- Prediction is fast
- Features don't need scaling
- Automatically learns feature interactions
- Tends to ignore irrelevant features
- Non-parametric (will outperform linear models if relationship between features and response is highly non-linear)

**Disadvantages of decision trees:**

- Performance is (generally) not competitive with the best supervised learning methods
- Can easily overfit the training data (tuning is required)
- Small variations in the data can result in a completely different tree (high variance)
- Recursive binary splitting makes "locally optimal" decisions that may not result in a globally optimal tree
- Doesn't tend to work well if the classes are highly unbalanced
- Doesn't tend to work well with very small datasets